[NSRCA-discussion] 160Dz question

[Courtney, Gary Ray]

piston or ring or both possibly! I have heard of this same symptom
(bottom of a outside loop at the push) and that was the eventual cure???
 
 
gary

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ed Deaver
Sent: Sunday, August 05, 2007 6:56 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] 160Dz question


Hey everyone.  Asking for a friend.  We are having problems getting his
pump set properly.
 
Few specifics:
Cool Power 30% heli fuel, Tetra tank, new plumbing, YS foam clunk, APC
17X10 prop, 3500 ft altitude.
 
On up lines it would sag occasionally, but otherwise ran great (working
on the Masters sequence)  Turned in (richened up) the pump a tad, better
then one more time and the vertical sag stopped, but doing the outside
6sided loop in Advanced, with the bottom of the push, the engine spits
and sputters terribly.  Strangely, not on any outside pushes in Masters,
just this one manuever. 
 
Anythoughts???
 
Thanx in advance.
 
ed

________________________________

Moody friends. Drama queens. Your life? Nope! - their life, your story.
Play Sims Stories at Yahoo! Games.
<http://us.rd.yahoo.com/evt=48224/*http://sims.yahoo.com/> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070806/2fd2db31/attachment.html