[NSRCA-discussion] Brio Hinges

[Kelly Regan]

I uses the Radio South hinges also.


Keith Black wrote:
> I did basically the same as Rick, but with Radio South large CA hinges.
>  
> When doing mine I heard the suggestion of slightly sanding the hinge 
> line to provide a bit of a flat area to insert the CA hinge. I did 
> this on the ailerons but not the elevator as I'd already completed 
> them before I heard the tip. This did make things slightly easier, 
> both look fine covered with Monokote.
>  
> Keith Black.
>
>     ----- Original Message -----
>     *From:* Rick Wallace <mailto:rickwallace45 at hotmail.com>
>     *To:* nsrca-discussion at lists.nsrca.org
>     <mailto:nsrca-discussion at lists.nsrca.org>
>     *Sent:* Monday, November 13, 2006 10:24 AM
>     *Subject:* Re: [NSRCA-discussion] Brio Hinges
>
>     I used regular CA hinges on my Brios - no problems. Angled the
>     cuts in both flying surface and control surface so that the hinge
>     deeper into the wood rather than staying in the sheeting. This
>     results in the hinges being bent at a slight angle when the
>     surface is at neutral - has absolutely not been an issue - about
>     220- 250 flights so far.
>
>     Hope this helps -
>
>     Rick
>
>         ------------------------------------------------------------------------
>         From:  /"Richard Strickland" <richard.s at allied-callaway.com>/
>         Reply-To:  /NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>/
>         To:  /"'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>/
>         Subject:  /[NSRCA-discussion] Brio Hinges/
>         Date:  /Mon, 13 Nov 2006 09:37:57 -0600/
>         >
>         >What's the best way to hinge beveled surfaces as on the Brio kit?
>         >
>         >Richard
>         >
>         >_______________________________________________
>         >NSRCA-discussion mailing list
>         >NSRCA-discussion at lists.nsrca.org
>         >http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>     ------------------------------------------------------------------------
>     Get FREE company branded e-mail accounts and business Web site
>     from Microsoft Office Live <http://g.msn.com/8HMAENUS/2734??PS=47575>
>
>     ------------------------------------------------------------------------
>     _______________________________________________
>     NSRCA-discussion mailing list
>     NSRCA-discussion at lists.nsrca.org
>     http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-- 
______________________________________________

Kelly Regan
www.reganbrothers.com
Home Page: http://mysite.verizon.net/vze6uror/
______________________________________________