[NSRCA-discussion] Masters Square 8
Stuart Chale
schale at optonline.net
Sun Nov 12 04:23:21 AKST 2006
" As for scoring, I'm not entirely sure it matters.
Don"
What Don said is probably true. Agreed there is a long inverted flight
before the first push to vertical in the horizontal eight and after the
humpty bump. If someone is weaving, or changing altitude during this
portion, the judge is going to downgrade one of the two maneuvers. I would
think if there was a reasonable straight and level after the humpty then the
rest is judged on the horizontal eight. Do we really have segments of
flight that should not be judged or added to a downgrade for anything but
straight and level?
Stuart Chale
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Don Ramsey
(CoxNet)
Sent: Saturday, November 11, 2006 8:40 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Masters Square 8
Lance,
I believe it starts at center. Straight line before center and start at
center. The reason I say that is rule 14.1 which says "Each time the model
passes before the judges, a maneuver is executed, except after takeoff and
landing." Of course, some maneuvers start before center as the slow roll,
etc. As for scoring, I'm not entirely sure it matters.
Don
----- Original Message -----
From: <jivey61 at bellsouth.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, November 11, 2006 7:16 PM
Subject: Re: [NSRCA-discussion] Masters Square 8
> Lance
> You will have to have a entry line before the push to vertical past
> center.This is where I think it starts... at the start of the entry line.
>
> Jim Ivey
> ----- Original Message -----
> From: "Lance Van Nostrand" <patterndude at comcast.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Saturday, November 11, 2006 7:51 PM
> Subject: Re: [NSRCA-discussion] Masters Square 8
>
>
>> OK,so where does the manuver begin and end? At center, the radius after
>> center, at the first corner initiation?
>>
>> --Lance
>>
>> ----- Original Message -----
>> From: <jivey61 at bellsouth.net>
>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> Sent: Saturday, November 11, 2006 4:06 PM
>> Subject: Re: [NSRCA-discussion] Masters Square 8
>>
>>
>> > Jason
>> > The way we are flying the 8 is enter inverted and 1st loop (outside) to
>> > the
>> > right of center and next (inside) loop to the left of center.The first
>> > loop
>> > is outside loop and 1st vertical segment starts past center.Of course
> swap
>> > left and right for opposite flying direction.
>> >
>> >
>> > Jim Ivey
>> >
>> > ----- Original Message -----
>> > From: "JShulman" <jshulman at cfl.rr.com>
>> > To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
>> > Sent: Saturday, November 11, 2006 4:08 PM
>> > Subject: [NSRCA-discussion] Masters Square 8
>> >
>> >
>> >> Hi All,
>> >>
>> >> Does the Square horizontal 8 start at center or just past center?
>> >>
>> >> Regards,
>> >> Jason
>> >> www.jasonshulman.com
>> >> www.shulmanaviation.com
>> >> www.composite-arf.com
>> >> --
>> >> No virus found in this outgoing message.
>> >> Checked by AVG Free Edition.
>> >> Version: 7.1.409 / Virus Database: 268.14.2/528 - Release Date:
>> >> 11/10/2006
>> >>
>> >>
>> >> _______________________________________________
>> >> NSRCA-discussion mailing list
>> >> NSRCA-discussion at lists.nsrca.org
>> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >
>> > _______________________________________________
>> > NSRCA-discussion mailing list
>> > NSRCA-discussion at lists.nsrca.org
>> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list