[NSRCA-discussion] Masters Square 8
Don Ramsey (CoxNet)
don.ramsey at cox.net
Sat Nov 11 16:40:38 AKST 2006
Lance,
I believe it starts at center. Straight line before center and start at
center. The reason I say that is rule 14.1 which says "Each time the model
passes before the judges, a maneuver is executed, except after takeoff and
landing." Of course, some maneuvers start before center as the slow roll,
etc. As for scoring, I'm not entirely sure it matters.
Don
----- Original Message -----
From: <jivey61 at bellsouth.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, November 11, 2006 7:16 PM
Subject: Re: [NSRCA-discussion] Masters Square 8
> Lance
> You will have to have a entry line before the push to vertical past
> center.This is where I think it starts... at the start of the entry line.
>
> Jim Ivey
> ----- Original Message -----
> From: "Lance Van Nostrand" <patterndude at comcast.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Saturday, November 11, 2006 7:51 PM
> Subject: Re: [NSRCA-discussion] Masters Square 8
>
>
>> OK,so where does the manuver begin and end? At center, the radius after
>> center, at the first corner initiation?
>>
>> --Lance
>>
>> ----- Original Message -----
>> From: <jivey61 at bellsouth.net>
>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> Sent: Saturday, November 11, 2006 4:06 PM
>> Subject: Re: [NSRCA-discussion] Masters Square 8
>>
>>
>> > Jason
>> > The way we are flying the 8 is enter inverted and 1st loop (outside) to
>> > the
>> > right of center and next (inside) loop to the left of center.The first
>> > loop
>> > is outside loop and 1st vertical segment starts past center.Of course
> swap
>> > left and right for opposite flying direction.
>> >
>> >
>> > Jim Ivey
>> >
>> > ----- Original Message -----
>> > From: "JShulman" <jshulman at cfl.rr.com>
>> > To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
>> > Sent: Saturday, November 11, 2006 4:08 PM
>> > Subject: [NSRCA-discussion] Masters Square 8
>> >
>> >
>> >> Hi All,
>> >>
>> >> Does the Square horizontal 8 start at center or just past center?
>> >>
>> >> Regards,
>> >> Jason
>> >> www.jasonshulman.com
>> >> www.shulmanaviation.com
>> >> www.composite-arf.com
>> >> --
>> >> No virus found in this outgoing message.
>> >> Checked by AVG Free Edition.
>> >> Version: 7.1.409 / Virus Database: 268.14.2/528 - Release Date:
>> >> 11/10/2006
>> >>
>> >>
>> >> _______________________________________________
>> >> NSRCA-discussion mailing list
>> >> NSRCA-discussion at lists.nsrca.org
>> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >
>> > _______________________________________________
>> > NSRCA-discussion mailing list
>> > NSRCA-discussion at lists.nsrca.org
>> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list