[NSRCA-discussion] 4.8 volt Vs 6.0 volt

[Steven Maxwell]

 Specs here. http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFKZ8&P=ML


> [Original Message]
> From: Bill Markovitz <wdmarko at yahoo.com>
> To: <nsrca-discussion at lists.nsrca.org>
> Date: 3/9/2006 11:28:30 AM
> Subject: [NSRCA-discussion] 4.8 volt Vs 6.0 volt
>
> Hi all..........I purchased a Quest and a Futaba 9CAF
> at the WRAM show.  The 9CAF comes with 3151 digital
> servos rated at 4.3 oz/in.  I would like to use these
> servos with the 90 size Quest for competing in the
> Intermediate class and won't be using it for 3D
> flying.  Are these servos adequate for this
> application?  If not, would going to 6 volts give me
> the additonal torque that I need?  How much more
> torque would going to 6 volts give me?  Are there any
> known problems using an on-board 6 volt power supply? 
> The 9CAF manual states that driving the servos with a
> 6 volt supply is an option.
>
> Thanks.............Bill       :)
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060309/754144c4/attachment.html