[NSRCA-discussion] Servos

[Stuart Chale]

Thanks for the input.  The specs of the servos you picked do seem to fit
their use.

Why convert the metal gears to nylon on the elev servo?

What is the difference between SA and the regular versions. Is it just metal
vs nylon?

 

Stu

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
DaveL322 at comcast.net
Sent: Wednesday, March 08, 2006 1:20 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Servos

 

Stu,

 

The JR servos will work with the Futaba RX, and you'll find quite a few guys
using JR servos with non JR RX/TX.

 

My preferred setup -

Ail - 2x9411sa

Ele - 1x8417sa (convert metal gears to nylon using 8231 gearset).

Rud - 1x8411sa

Thr - 1x3421sa

 

You can certainly find stronger servos that are of the same approximate
size/weight, but I've run them back to back with the above and on a 2M
pattern plane, more servo than the above is just more weight and expense.

 

Since the day of the analog 9101, pattern servos now are digital - I
wouldn't go with anything that is not digital.

 

Regards,

 

Dave Lockhart, Team JR

DaveL322 at comcast.net

 

 

-------------- Original message -------------- 
From: Stuart Chale <schale at optonline.net> 

 

Ok a basic question.  Which servos do you like to use on your 2M planes.  I
am looking for Futaba or Futaba compatible models.  The last quality servos
I bought were 9101's   Technology has advanced since I have been away and
the planes have gotten bigger :-)

 

Thanks,

Stuart C

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060308/3e527c79/attachment.html