[NSRCA-discussion] Airplane Rack

[Bill Glaze]

Jerry:
Will you have this setup at Muncie this year?  to be honest, I have trouble 
visualizing just what's happening from the photos.  (I don't know why I'm 
having the trouble; I'm sure the photos make everything clear for all the 
other folks.)
Bill Glaze
----- Original Message ----- 
From: "Jerry Budd" <jerry at buddengineering.com>
To: <nsrca-discussion at lists.nsrca.org>; <dist7 at nsrca.org>
Sent: Tuesday, February 28, 2006 1:15 AM
Subject: [NSRCA-discussion] Airplane Rack


> Hi all,
>
> Someone recently asked me to post some photos of the airplane rack I
> built for my 2004 Honda Odyssey a couple of years ago.  It holds two
> 2m pattern planes and allows for full unrestricted access to the open
> storage area underneath it.  It only took an evening to design and
> build and it cost ~$25.  It also disassembles very quickly (simply
> remove two wing nuts holding down the metal landing gear support) for
> those rare occasions when you need to use the mini-van for something
> other than storing & transporting your planes!
>
> Here's a link to some photos:  http://tinyurl.com/s6ncr
>
> Thx, Jerry
> -- 
> ___________
> Jerry Budd
> Budd Engineering
> (661) 722-5669 Voice/Fax
> (661) 435-0358 Cell Phone
> mailto:jerry at buddengineering.com
> http://www.buddengineering.com
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>