[NSRCA-discussion] Acetone in methanol?

Gray E Fowler gfowler at raytheon.com
Tue Feb 21 06:00:57 AKST 2006


Tom

Not sure of YS engines but most 2-stroke engine pumps have a diaphram made 
of teflon coated glass, which is fine with the acetone, but silicone fuel 
tubing will be deteriorated, as will any othe silicone part  (if any) in 
your engine. Viton will resist acetone okay (o-rings). Big problem may be 
volatility as acetone will boil at about 40C (note that I converted for 
your benefit) which is way lower than the other components in fuel. If 
Acetone works and is not damaging your engine seals (use gasoline tubing) 
try Methy-ethyl Ketone (MEK), more expensive, much less volatile (one more 
carbon in the molecule). Next up the chain is methy-isopropyl Ketone, 
which is a difficult product to obtain in the USA at a hardware 
store....gotta go to Fisher chemical.



Gray Fowler
Principal Chemical Engineer
Composites Engineering



"Koenig, Tom" <Tom.Koenig at actewagl.com.au> 
Sent by: nsrca-discussion-bounces at lists.nsrca.org
02/20/2006 04:46 PM
Please respond to
NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>


To
"NSRCA" <nsrca-discussion at lists.nsrca.org>
cc

Subject
[NSRCA-discussion] Acetone in methanol?






Gentlemen,
You may be aware most of us down here mix our own fuel. We have available 
pure Methanol or a methanol product 'Shell A' which has 3% Acetone in it.
I have added 2-3% acetone into my fuel mix ( I buy pure Methanol) and I'm 
not sure if I could detect a difference, if any at all. It may have idled 
a bit better-but it could have been my imagination??
 
So my question is-what exactly can/does Acetone do in our fuel mixes?? 
Does it do anything at all?? 
 
Thanks for any insight.
 
Tom
************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all 
copies and advise the sender. The reproduction or 
dissemination of this email or its attachments is 
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty 
is given that this email or its attachments are virus free. 
Before opening or using attachments, please check for 
viruses. Our liability is limited to the re-supply of any 
affected attachments.

Any views expressed in this message are those of the 
individual sender, except where the sender expressly,
and with authority, states them to be the views of the 
organisation.
************************************************************************
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060221/c0eabe43/attachment.html 


More information about the NSRCA-discussion mailing list