[NSRCA-discussion] Smoke

[Scott Pavlock]

http://www.regin.com/rcsmoke.html

The smoke cannisters the above website sells may work for you. I know that
you can adjust the smoke density be size of the cannister. Not sure how
toxic/corrosive it is however.

Scott

On 2/19/06, Earl Haury <ehaury at houston.rr.com> wrote:
>
> Has anyone experience with smoke generators that might be used to observe
> cooling airflows around motors / engines? I've experience with smoke wands /
> sticks, but the ones I'm familiar with produce corrosive / toxic smoke (and
> often way too much). I've also looked at the smoke generators used by the
> scale RC steamboat folks, but they don't seem to generate enough smoke. (I
> can get about the same with a soldering gun and flux / oil.) I'd really like
> a controllable wand that generated a fairly small stream of dense smoke. Any
> ideas?
>
> Earl
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060219/b5911c54/attachment-0001.html