[NSRCA-discussion] Cooling inlet/out sizes???

[Bill Glaze]

Makes for an interesting cowling if it's a scale radial engine; i.e. P-47, F8 Bearcat, Stearman, etc.
  ----- Original Message ----- 
  From: jivey61 at bellsouth.net 
  To: TJS at mail.global-electronics.com ; NSRCA Mailing List 
  Sent: Sunday, February 12, 2006 11:21 PM
  Subject: Re: [NSRCA-discussion] Cooling inlet/out sizes???


  Tim
   I think the rule of thumb...... exhaust should be 4 times the area of the intake. That also depends on the oat(temp) you fly in.

  Jim Ivey
    ----- Original Message ----- 
    From: Tim Of Global Electronics, Ltd. 
    To: NSRCA Mailing List 
    Sent: Sunday, February 12, 2006 11:03 PM
    Subject: [NSRCA-discussion] Cooling inlet/out sizes???


    Can anyone tell me which should  be larger, the colling air input or the exhaust output inside the cowl???

    Thanks
    tim 



----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060213/cd6090b0/attachment.html