[NSRCA-discussion] NMP Headers

[jivey61 at bellsouth.net]

Bob
You didn't say if you had them, but you may need 2 washers between the header and the head.I'm not talking inside washer like we used to use. These are bigger than that inside washer. Central has them. I had a similar problem.
Jim Ivey
  ----- Original Message ----- 
  From: THERUPMAN at aol.com 
  To: nsrca-discussion at lists.nsrca.org 
  Sent: Sunday, February 12, 2006 1:23 PM
  Subject: [NSRCA-discussion] NMP Headers


  Help needed,
  If this has been covered before, just point me to it.
  I've got a YS FZ in a QQ Yak with an early NMP hdr.
  I'd like to say I've installed it per instructions, but sometimes I miss something.
  Anyway. Every flight loosens the header connection to the head. The cap connection stays tight, but it does have the small screw to keep it from backing out. Engine runs fine. Any help would be appreciated.
  Bob Ruppel in Nashville


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060212/44aac55c/attachment.html