[NSRCA-discussion] NMP Headers

[Zoro1024 at aol.com]

Bob, heres what I know about the headers.  The early ones were not  very 
good.  The ones currently produced are much better.  They have a  steel inner nut, 
the flange of the header is thicker and they have copper  washers inside and 
on the the mount flange side.  I run two washers on the  mount flange side and 
one on the hollow mount nut on the inside. It works pretty  well and most of 
the guys I know who are running them have pretty good  success.  If you have 
one with the old aluminum mount bolt, send it back,  they just wont work.
 
 
Mike H.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060212/5fdb6099/attachment.html