[NSRCA-discussion] Back to pattern stuff

[David Flynt]

So Matt, is this a polyurethane hard foam that you can cut and sand for
creating plugs?  What is the thickness of it, and what is the density?

David
  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of
Rcmaster199 at aol.com
  Sent: Wednesday, February 08, 2006 2:58 PM
  To: nsrca-discussion at lists.nsrca.org
  Subject: [NSRCA-discussion] Back to pattern stuff


  Using bluecor foam from Lowes seems to work well. Shapes easily, is
reasonably strong material and serves to hold the reinforcing sticks well.
Accepts foam friendly ca and probond very well. I sanded the polyester film
backing off since I am finishing in silkspan and water based polyu paint.

  Have the main components of the small pattern job about done. Wing spans
46" with an area of 470 sqin. Fuse length is 50". I'll post pics when I get
around to it
  MattK

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060208/22edb328/attachment.html