[NSRCA-discussion] Cooling outrunners

[JShulman]

This was the picture I was looking for
http://www.plettenberg-motoren.com/UK/zuxtra.htm

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com

  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of J.Oddino
  Sent: Friday, December 15, 2006 7:13 PM
  To: NSRCA Mailing List
  Subject: [NSRCA-discussion] Cooling outrunners


  It would seem the best way to cool outrunners that have holes in the case
on the end that faces the nose ring, would be to bring air in through the
spinner and through holes in the backplate.  Wondering if anyone has really
thought about the optimum design.  I can picture internal vanes but perhaps
cutting off the nose of the spinner and leaving a big hole would be
adequate.  Anyone tried anything like this?

  Jim O
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.20/588 - Release Date: 12/15/2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061216/5ec19ff7/attachment.html