[NSRCA-discussion] ] servo question again

[Ed Alt]

Jim  - I see what you are referring to on the Horizon site, but there is 
also an all-nylon set available.  If you start out with the metal gear 
servo, you buy the all nylon set and use the metal output gear form the 
original set, then replace the rest with nylon.  I don't have the part 
number handy, but the local hobby shop gets these for me easily.

Ed

----- Original Message -----
From: "Ed Alt" <ed_alt at hotmail.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, December 05, 2006 8:18 PM
Subject: Re: [NSRCA-discussion] ] servo question again

> The nylon gears are only a few bucks - the metal gear sets are the pricey 
> ones.
>
> ----- Original Message -----
> From: <jivey61 at bellsouth.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Tuesday, December 05, 2006 7:53 PM
> Subject: Re: [NSRCA-discussion] ] servo question again
>
>> That sounds good Ed but Horizon gets 20-25 dollars for their gear kits 
>> for
>> these servos.
>> Jim Ivey
>> ----- Original Message ----- 
>> From: "Ed Alt" <ed_alt at hotmail.com>
>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> Sent: Tuesday, December 05, 2006 4:58 PM
>> Subject: Re: [NSRCA-discussion] ] servo question again
>>
>>
>>> If they have standard 8411's, you could just get the nylon replacement
>> gears
>>> and roll your own SA.  I did that with all the 8411's I used to use on 
>>> the
>>> IMAC stuff I had.  Another option might be to pick up the 8311, which is
>> an
>>> 8411 with a different motor. It has slightly less torque, and is plenty
>>> quick. It was a re-tooling to work on heli tail rotors, which were 
>>> burning
>>> up the 8411's sometimes with all the incessant dithering that goes on in
>>> that application.
>>>
>>> Ed
>>>
>>> ----- Original Message -----
>>> From: "Kelly Regan" <kelly.regan2 at verizon.net>
>>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>>> Sent: Tuesday, December 05, 2006 4:44 PM
>>> Subject: Re: [NSRCA-discussion] ] servo question again
>>>
>>> > Thanks guys,
>>> > I went with 9411SA on the ailerons and 8411SA on the rudder and
>> elevator.
>>> > Unfortunately horizon, central, and Don's hobby are out of stock on 
>>> > the
>>> > 8411SA's.  JR is saying end if December.
>>> >
>>> >
>>> > Park, Ihncheol wrote:
>>> >> I agree with Anthony 100%.  I am using one as a test in a small 
>>> >> pattern
>>> >> plane.  There isn't any servo that compares to the Airtronics 94758
>>> >> You have to get used to the speed of this servo for the couple of
>>> >> flights.
>>> >> I am also using Futaba 9650 for 50/60 size planes.
>>> >>
>>> >> Ihncheol Park
>>> >> P & A Hobbies
>>> >>
>>> >>
>>> >> -----Original Message-----
>>> >> From: nsrca-discussion-bounces at lists.nsrca.org
>>> >> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of 
>>> >> Anthony
>>> >> Romano
>>> >> Sent: Tuesday, December 05, 2006 8:06 AM
>>> >> To: nsrca-discussion at lists.nsrca.org
>>> >> Subject: [NSRCA-discussion] ] servo question again
>>> >>
>>> >> Hi Ed,
>>> >> The 8417 is the servo you are thinking of 82 oz of torque @ .10sec/60
>>> >> deg.
>>> >> My choice for the elevator or rudder for that matter is an Airtronics
>>> >> 94758.
>>> >>
>>> >>    115 oz .06sec/60 deg. on 6 volts not sure what voltage JR rates
>> their
>>> >> servos at.
>>> >>
>>> >> Anthony
>>> >>
>>> >>
>>> >>
>>> >>> From: "Ed Alt" <ed_alt at hotmail.com>
>>> >>> Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>>> >>> To: <NSRCA-discussion at lists.nsrca.org>
>>> >>> Subject: Re: [NSRCA-discussion] servo question again
>>> >>> Date: Mon, 4 Dec 2006 22:59:07 -0500
>>> >>>
>>> >>> Kelly:
>>> >>> I would suggest the 8411SA on the rudder.  It will also handle the
>>> >>> elevator nicely.  I think that Dave Lockhart uses something like an
>>> >>> 8317 re-geared in some way for the elevator, but I can't remember 
>>> >>> his
>>> >>> recipe for that exactly.
>>> >>> Whatever he's doing, it's targeted at the best combination of speed
>> and
>>> >>> torque available from available product. I remember that the specs 
>>> >>> he
>>> >>> quoted were definitely faster than what an 8411SA would deliver,
>>> >>> although at less torque (plenty for the application though).  As I
>>> >>> recall, the reason he does this is for that extra bit of speed to 
>>> >>> help
>>> >>> get a cleaner break in pitch for snaps.
>>> >>>
>>> >>> Ed
>>> >>>
>>> >>> ----- Original Message -----
>>> >>> From: "Kelly Regan" <kelly.regan2 at verizon.net>
>>> >>> To: <NSRCA-discussion at lists.nsrca.org>
>>> >>> Sent: Monday, December 04, 2006 10:43 PM
>>> >>> Subject: [NSRCA-discussion] servo question again
>>> >>>
>>> >>>
>>> >>>> Getting real close to flying time! ;)
>>> >>>>
>>> >>>> I have had good luck with the Hitec digital servo's in my large gas
>>> >>>> planes but I think I want to try out some JR's for my Brio.
>>> >>>>
>>> >>>> Can I do 9411SA all around or should I do 9411SA on the ailerons 
>>> >>>> and
>>> >>>> 8411SA on the rudder and elevator (DEPS elevator)?
>>> >>>>
>>> >>>> I will be running a 2400 Lio-ion pack with a Fromco regulator.
>>> >>>> maybe a bit overkill, but I already have it.
>>> >>>>
>>> >>>> Thank you for the help
>>> >>>>
>>> >>>> --
>>> >>>> ______________________________________________
>>> >>>>
>>> >>>> Kelly Regan
>>> >>>> www.reganbrothers.com
>>> >>>> Home Page: http://mysite.verizon.net/vze6uror/
>>> >>>> ______________________________________________
>>> >>>>
>>> >>>> _______________________________________________
>>> >>>> NSRCA-discussion mailing list
>>> >>>> NSRCA-discussion at lists.nsrca.org
>>> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> >>>>
>>> >>>>
>>> >>> _______________________________________________
>>> >>> NSRCA-discussion mailing list
>>> >>> NSRCA-discussion at lists.nsrca.org
>>> >>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> >>>
>>> >>
>>> >> _________________________________________________________________
>>> >> MSN Shopping has everything on your holiday list. Get expert picks by
>>> >> style,
>>> >> age, and price. Try it!
>>> >>
>> http://shopping.msn.com/content/shp/?ctId=8000,ptnrid=176,ptnrdata=200601&tc
>>> >> ode=wlmtagline
>>> >>
>>> >> _______________________________________________
>>> >> NSRCA-discussion mailing list
>>> >> NSRCA-discussion at lists.nsrca.org
>>> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> >>
>>> >>
>>> >> _______________________________________________
>>> >> NSRCA-discussion mailing list
>>> >> NSRCA-discussion at lists.nsrca.org
>>> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> >>
>>> >>
>>> >
>>> > -- 
>>> > ______________________________________________
>>> >
>>> > Kelly Regan
>>> > www.reganbrothers.com
>>> > Home Page: http://mysite.verizon.net/vze6uror/
>>> > ______________________________________________
>>> >
>>> > _______________________________________________
>>> > NSRCA-discussion mailing list
>>> > NSRCA-discussion at lists.nsrca.org
>>> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> >
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>