[NSRCA-discussion] 160 DZ Black residue out the front?

[Mark Atwood]

Check the headbolts too.   I had one loose for a while...the motor ran ok,
but power was down.  When I finally found it, the vibration had worn a gap
between the head and the case...I¹ll need to replace both now.  Tightening
the bolt helped...but it¹s still able to suck air because of the wear.

The ³tell² was the same thing...black ³gook² spewing on the side of the nose
of the plane.  Looked like it should be from the spinner or header, but
wasn¹t.


On 8/14/06 10:33 PM, "brian young" <brian_w_young at yahoo.com> wrote:

> Have some black oily residue coming onto the plane nose behind the spinner?
>   
>  
>   
> A telltale of things to come Im sure, anyone have suggestion as to what it
> would be?
>  
> 
> How low will we go? Check out Yahoo! Messenger¹s low  PC-to-Phone call rates.
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060815/7dfe93ac/attachment.html