[NSRCA-discussion] YS 160 help needed

[Robert & Casey Green]

Steve see if you can use a fuel tubing to connect the two together
  ----- Original Message ----- 
  From: Steve Ford 
  To: NSRCS Board 
  Sent: Wednesday, August 09, 2006 8:20 PM
  Subject: [NSRCA-discussion] YS 160 help needed


  Hi all.  Tonight on my YS 1.60 the check valve came out of the head of the motor.  It appears to be just a pressure fitting, pushed it back in, but wouldn't stay in.

  Any help would be greatly appreciated, contest this weekend of course.  My thoughts are leaning towards jb weld or something similar.  

  Thanks,
  Steve Ford


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060810/8333b366/attachment.html