[NSRCA-discussion] Brio 10 balance and weights

[mike mueller]

 Most discussions have mentioned nose heavy. Mine required the tail mounting. It really depends on the motor your using. I determine my balance by the way I like a plane to fly which is virtually no down elevator at inverted. Mike

"Tim Of Global Electronics, Ltd." <TJS at mail.global-electronics.com> wrote:  I just got mine last night. The owner of the hobby store told me they 
built one the night before and it came in very nose heavy. He suggested 
putting the rudder servo in the rear and shortening the nose where possible.

So my question is, those who have built a Brio, are they comming in nose 
or tail heavy? And what are the weights you guys are seeing?

Thanks
Tim
begin:vcard
fn:Tim Seyfarth
n:Seyfarth;Tim
org:Global Electronics, Ltd.
adr:;;3670 E Chipman Road;Phoenix;AZ;85040;USA
email;internet:TJS at mail.global-electronics.com
title:President
tel;work:602-437-8005
tel;fax:602-437-8009
x-mozilla-html:TRUE
url:http://www.global-electronics.com
version:2.1
end:vcard

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1&cent;/min.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060423/ca83b27e/attachment.html