[NSRCA-discussion] Brio 10 balance and weights

[Ed Alt]

31.3 oz, configured as per previous email

  ----- Original Message ----- 
  From: mike mueller 
  To: TJS at mail.global-electronics.com ; NSRCA Mailing List 
  Sent: Sunday, April 23, 2006 3:29 PM
  Subject: Re: [NSRCA-discussion] Brio 10 balance and weights


   Most discussions have mentioned nose heavy. Mine required the tail mounting. It really depends on the motor your using. I determine my balance by the way I like a plane to fly which is virtually no down elevator at inverted. Mike

  "Tim Of Global Electronics, Ltd." <TJS at mail.global-electronics.com> wrote: 
    I just got mine last night. The owner of the hobby store told me they 
    built one the night before and it came in very nose heavy. He suggested 
    putting the rudder servo in the rear and shortening the nose where possible.

    So my question is, those who have built a Brio, are they comming in nose 
    or tail heavy? And what are the weights you guys are seeing?

    Thanks
    Tim
    begin:vcard
    fn:Tim Seyfarth
    n:Seyfarth;Tim
    org:Global Electronics, Ltd.
    adr:;;3670 E Chipman Road;Phoenix;AZ;85040;USA
    email;internet:TJS at mail.global-electronics.com
    title:President
    tel;work:602-437-8005
    tel;fax:602-437-8009
    x-mozilla-html:TRUE
    url:http://www.global-electronics.com
    version:2.1
    end:vcard

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




------------------------------------------------------------------------------
  Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060423/03d39ea1/attachment.html