[NSRCA-discussion] phenolic wing adjuster sockets

[Ron Van Putte]

On Apr 17, 2006, at 4:44 PM, rcmaster199 at aol.com wrote:

> Try this approcah to create a set. Apply 2 layers of wax paper to  
> the tube and lock ends down with masking tape. VERY lightly spray  
> the wax paper with 3M77. Lay up some 4 ozs glass cloth of  
> appropriate length on the tube. The contact glue will stick the  
> glass well enough for easy lay-up. You will need 2-3 layers. Then  
> either use thin ca for instant gratification or finishing epoxy if  
> you can wait overnite.
>
> After the glue has kicked, heat the glass with aheat gun lightly to  
> melt the wax, and pull the glass tubes off. Very snug fit
>

Matt - Your response reminded me of my father-in-law.  My wife once  
told me, "Don't ask him a question unless you have a lot of time to  
listen.  Once, I asked him what time it was and he told me how to  
build a clock."

Sorry, I couldn't resist.

Ron Van Putte

> -----Original Message-----
> From: Scott Smith <js.smith at verizon.net>
> To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
> Sent: Mon, 17 Apr 2006 17:29:12 -0400
> Subject: [NSRCA-discussion] phenolic wing adjuster sockets
>
> I'm in need of a pair of Gator phenolic wing adjuster sockets. Does  
> anybody
> have a pair they could sell or know of a possible substitute?
>
> Thanks,
>
> Scott
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060417/505f4810/attachment.html