[NSRCA-discussion] phenolic wing adjuster sockets

[rcmaster199 at aol.com]

LOL, whatever!! 
 
The man asked for an alternate so I gave him another option. On second thought since you obviously don't need any tubes, why not send him a few spares? (G)
 
Did you build it?? 
 
Matt 
 
-----Original Message-----
From: Ron Van Putte <vanputte at cox.net>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Mon, 17 Apr 2006 16:53:54 -0500
Subject: Re: [NSRCA-discussion] phenolic wing adjuster sockets




On Apr 17, 2006, at 4:44 PM, rcmaster199 at aol.com wrote:


Try this approcah to create a set. Apply 2 layers of wax paper to the tube and lock ends down with masking tape. VERY lightly spray the wax paper with 3M77. Lay up some 4 ozs glass cloth of appropriate length on the tube. The contact glue will stick the glass well enough for easy lay-up. You will need 2-3 layers. Then either use thin ca for instant gratification or finishing epoxy if you can wait overnite.
 
After the glue has kicked, heat the glass with aheat gun lightly to melt the wax, and pull the glass tubes off. Very snug fit




Matt - Your response reminded me of my father-in-law.  My wife once told me, "Don't ask him a question unless you have a lot of time to listen.  Once, I asked him what time it was and he told me how to build a clock."


Sorry, I couldn't resist.


Ron Van Putte


-----Original Message-----
From: Scott Smith <js.smith at verizon.net>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Mon, 17 Apr 2006 17:29:12 -0400
Subject: [NSRCA-discussion] phenolic wing adjuster sockets


I'm in need of a pair of Gator phenolic wing adjuster sockets. Does anybody
have a pair they could sell or know of a possible substitute?

Thanks,

Scott


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

= 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060417/6d6893a6/attachment.html