[NSRCA-discussion] phenolic wing adjuster sockets

[rcmaster199 at aol.com]

Scott,
 
Try this approcah to create a set. Apply 2 layers of wax paper to the tube and lock ends down with masking tape. VERY lightly spray the wax paper with 3M77. Lay up some 4 ozs glass cloth of appropriate length on the tube. The contact glue will stick the glass well enough for easy lay-up. You will need 2-3 layers. Then either use thin ca for instant gratification or finishing epoxy if you can wait overnite.
 
After the glue has kicked, heat the glass with aheat gun lightly to melt the wax, and pull the glass tubes off. Very snug fit
 
Matt
 
-----Original Message-----
From: Scott Smith <js.smith at verizon.net>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Mon, 17 Apr 2006 17:29:12 -0400
Subject: [NSRCA-discussion] phenolic wing adjuster sockets



I'm in need of a pair of Gator phenolic wing adjuster sockets. Does anybody
have a pair they could sell or know of a possible substitute?

Thanks,

Scott


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060417/16a60c11/attachment-0001.html