Webra 1.45 remote glow

[Charlie Rock]

Drill and tap a head fin attach the wire to that ...Charlie
----- Original Message ----- 
From: "David Wartel" <d.wartel at comcast.net>
To: <discussion at nsrca.org>
Sent: Monday, May 16, 2005 9:14 PM
Subject: Webra 1.45 remote glow


> I'm trying to install a remote glow plug on a Webra 1.45. The head seems 
> to be insulated from the crank case so the ground does not work when 
> connected to a mount lug bolt. The remote works when the plug is touched 
> to the crank case, or when the ground is touched to the head. I don't see 
> a way to connect the ground to the head.
>
> Anyone have suggestions?
>
> Thanks, Dave
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.