Futaba 8UAF Mode 3 Programming Glitch?

[Beverly Cowell]

Ken is correct. For throttle and aileron on left stick, you must select mode
4 on both the 8UAF and the 9C.

Bev.
----- Original Message -----
From: "Ken Velez" <kvelez at comcast.net>
To: <discussion at nsrca.org>
Sent: Saturday, March 26, 2005 9:41 PM
Subject: Re: Futaba 8UAF Mode 3 Programming Glitch?


>   Hi Walter I think you want  mode 4 instead of 3. Ailerons and throtlle
in
> the left stick and rudder and elevator on the right stick. The servos
> connect on the receiver as you normally would with Futaba. Hope it helps,
>
> Ken V
> ----- Original Message -----
> From: "Walter Nasse" <wwnasse at eidnet.org>
> To: "NSRCA Discussion" <discussion at nsrca.org>
> Sent: Saturday, March 26, 2005 8:51 PM
> Subject: Futaba 8UAF Mode 3 Programming Glitch?
>
>
> > Has anyone experienced problems with crossover in channels 2
(elevator)and
> > 3(throttle) when switching the transmitter to mode 3 from mode 2?   The
> left
> > stick has throttle and aileron and the right stick rudder and elevator.
> The
> > program settings for throttle cut affects the elevator servo and ATV for
> > elevator affects throttle.
> > Am I doing something wrong or should I just plug the servos into the
> > offsetting places in the reciever and set the transmitter back to mode
2?
> >
> > Walter
> >
> >
> >
> > --
> > Internal Virus Database is out-of-date.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.298 / Virus Database: 265.6.3 - Release Date: 12/21/2004
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > List members email returned for mailbox full will be removed from the
> list.
> >
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
list.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.