Futaba 8UAF Mode 3 Programming Glitch?

[Ken Velez]

  Hi Walter I think you want  mode 4 instead of 3. Ailerons and throtlle in
the left stick and rudder and elevator on the right stick. The servos
connect on the receiver as you normally would with Futaba. Hope it helps,

Ken V
----- Original Message ----- 
From: "Walter Nasse" <wwnasse at eidnet.org>
To: "NSRCA Discussion" <discussion at nsrca.org>
Sent: Saturday, March 26, 2005 8:51 PM
Subject: Futaba 8UAF Mode 3 Programming Glitch?


> Has anyone experienced problems with crossover in channels 2 (elevator)and
> 3(throttle) when switching the transmitter to mode 3 from mode 2?   The
left
> stick has throttle and aileron and the right stick rudder and elevator.
The
> program settings for throttle cut affects the elevator servo and ATV for
> elevator affects throttle.
> Am I doing something wrong or should I just plug the servos into the
> offsetting places in the reciever and set the transmitter back to mode 2?
>
> Walter
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.3 - Release Date: 12/21/2004
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
list.
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.