Futaba 8UAF Mode 3 Programming Glitch?

[Ronald Filteau]

Hi Walter

I ran this set up in a 8.  I think you have to change the trim function to
the right channels but will check.

Ron
----- Original Message ----- 
From: "Walter Nasse" <wwnasse at eidnet.org>
To: "NSRCA Discussion" <discussion at nsrca.org>
Sent: Saturday, March 26, 2005 7:51 PM
Subject: Futaba 8UAF Mode 3 Programming Glitch?


> Has anyone experienced problems with crossover in channels 2 (elevator)and
> 3(throttle) when switching the transmitter to mode 3 from mode 2?   The
left
> stick has throttle and aileron and the right stick rudder and elevator.
The
> program settings for throttle cut affects the elevator servo and ATV for
> elevator affects throttle.
> Am I doing something wrong or should I just plug the servos into the
> offsetting places in the reciever and set the transmitter back to mode 2?
>
> Walter
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.3 - Release Date: 12/21/2004
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
list.
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.