YS-91 almost done

[Ken Thompson]

Bill,
Glad I could help with that low blood pressure problem you had<LOL>

Ken
  ----- Original Message ----- 
  From: Bill Glaze 
  To: discussion at nsrca.org 
  Sent: Thursday, June 09, 2005 10:17 AM
  Subject: Re: YS-91 almost done


  Ken: I read your first paragraph, and passed out in front of the computer!  Don't ever say anything like that again!! ;-)   Bill Glaze

  Ken Thompson wrote:

    Well folks, 

    This is what I did, I pulled the head and took it apart just like Mike Darr told me to do.  I didn't even lose the spring retainers.  
    I chucked the stem up in my Dremel and cranked it up on high, having some plumbers sandpaper handy I ran a strip of 100 grit on the stem until it shines like new!  That ought to do it!!  

    Not really, I did just like Verne told me too and used a # 11 and scraped it gently just until the rough stuff was gone.  I wiped the stems with a rag and am ready to re-install the valves.  I am going to use toothpaste to re-seat the valves and my question is, when I'm done with that can I just wipe the excess off or do I need to clean it with something special before re-assembly.

    Thanks in advance,
    Ken
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050609/1905a855/attachment.html