YS-91 almost done

Bill Glaze billglaze at triad.rr.com
Thu Jun 9 06:18:07 AKDT 2005


Ken: I read your first paragraph, and passed out in front of the 
computer!  Don't ever say anything like that again!! ;-)   Bill Glaze

Ken Thompson wrote:

> Well folks,
>  
> This is what I did, I pulled the head and took it apart just like Mike 
> Darr told me to do.  I didn't even lose the spring retainers. 
> I chucked the stem up in my Dremel and cranked it up on high, having 
> some plumbers sandpaper handy I ran a strip of 100 grit on the stem 
> until it shines like new!  That ought to do it!! 
>  
> Not really, I did just like Verne told me too and used a # 11 and 
> scraped it gently just until the rough stuff was gone.  I wiped the 
> stems with a rag and am ready to re-install the valves.  I am going to 
> use toothpaste to re-seat the valves and my question is, when I'm done 
> with that can I just wipe the excess off or do I need to clean it with 
> something special before re-assembly.
>  
> Thanks in advance,
> Ken

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050609/6087a401/attachment.html


More information about the NSRCA-discussion mailing list