YS-91 almost done

[Bill Glaze]

    Ken:
Kidding aside, I'm happy that you have apparently gotten your problems 
solved.  The fraternity of helpfulness on this list can scarcely be 
overestimated.  Bill Glaze

Ken Thompson wrote:

> Bill,
> Glad I could help with that low blood pressure problem you had<LOL>
>  
> Ken
>
>     ----- Original Message -----
>     From: Bill Glaze <mailto:billglaze at triad.rr.com>
>     To: discussion at nsrca.org <mailto:discussion at nsrca.org>
>     Sent: Thursday, June 09, 2005 10:17 AM
>     Subject: Re: YS-91 almost done
>
>     Ken: I read your first paragraph, and passed out in front of the
>     computer!  Don't ever say anything like that again!! ;-)   Bill Glaze
>
>     Ken Thompson wrote:
>
>>     Well folks,
>>      
>>     This is what I did, I pulled the head and took it apart just like
>>     Mike Darr told me to do.  I didn't even lose the spring retainers. 
>>     I chucked the stem up in my Dremel and cranked it up on high,
>>     having some plumbers sandpaper handy I ran a strip of 100 grit on
>>     the stem until it shines like new!  That ought to do it!! 
>>      
>>     Not really, I did just like Verne told me too and used a # 11 and
>>     scraped it gently just until the rough stuff was gone.  I wiped
>>     the stems with a rag and am ready to re-install the valves.  I am
>>     going to use toothpaste to re-seat the valves and my question is,
>>     when I'm done with that can I just wipe the excess off or do I
>>     need to clean it with something special before re-assembly.
>>      
>>     Thanks in advance,
>>     Ken
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050609/ab76be5a/attachment.html