Glow Engine Vs. Electric Engine for 2 m' pattern plane

[Mike Hester]

He does that at home too. Then again usually later in the day....every 
day....

I like what Frank Chick said: "He cheats, he practices too much!" Hehehe.

-Mike

----- Original Message ----- 
From: "Scott Anderson" <scott at rcfoamy.com>
To: <discussion at nsrca.org>
Sent: Thursday, June 02, 2005 9:57 AM
Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane


> Yeah but Cameron starts flying at sunrise... At the KCRC ( knoxville ) 
> meet he was out at 6:30 am flying with his coach buddy..
>
> scott
> ----- Original Message ----- 
> From: "Cameron Smith" <dentdoc007 at adelphia.net>
> To: <discussion at nsrca.org>
> Sent: Thursday, June 02, 2005 8:19 AM
> Subject: RE: Glow Engine Vs. Electric Engine for 2 m' pattern plane
>
>
>> If my 20 oz tank yields me 2.5 times thru the Masters sequence. And
>> let's say I have 5 to 7 practice flights in a day.
>>
>> 1. How many batteries do I need to equal that flight time?
>> 2. How much $$ will I spend on batteries?
>> 3. How long will it take 2 Chargers to charge batteries before I can
>> even go to the field?
>>
>>
>>
>> -----Original Message-----
>> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
>> On Behalf Of Ken Thompson
>> Sent: Thursday, June 02, 2005 6:09 AM
>> To: discussion at nsrca.org
>> Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane
>>
>> Jerry,
>>
>> I believe MaxAmps has 2250 mAh cells, when wired in 4S3P packs and using
>> 2
>> in series should get you 24 cells at 6750 mAh.  That should be enough
>> for
>> Masters rounds, though you will have to have a spare set while one
>> charges.
>>
>> Ken
>> ----- Original Message ----- 
>> From: "Jerry Budd" <jerry at buddengineering.com>
>> To: <discussion at nsrca.org>
>> Sent: Wednesday, June 01, 2005 11:28 PM
>> Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane
>>
>>
>>> Uh, I just checked the website and those cells are way too low of
>> capacity
>>> to use for pattern.
>>>
>>> ???
>>>
>>> Jerry
>>>
>>>>Call Austin at MaxAmps.com  he has Lipos that will work..
>>>>
>>>>Stay tuned for my 2M electric pattern plane project..
>>>>
>>>>Scott Anderson
>>>>NSRCA 529
>>>>D3-AVP
>>>
>>> -- 
>>> ___________
>>> Jerry Budd
>>> Budd Engineering
>>> (661) 722-5669 Voice/Fax
>>> (661) 435-0358 Cell Phone
>>> mailto:jerry at buddengineering.com
>>> http://www.buddengineering.com
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to
>> http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>> List members email returned for mailbox full will be removed from the
>>> list.
>>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the
>> list.
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the 
>> list.
>>
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.