Glow Engine Vs. Electric Engine for 2 m' pattern plane

[Scott Anderson]

Jerry,

That's why I said to call.. He is getting new cells in  My pack is going to 
be a 10s2p at 4900mah..
I'm coping a system in use and in the p sequence it uses about 3900mah..

scott


----- Original Message ----- 
From: "Jerry Budd" <jerry at buddengineering.com>
To: <discussion at nsrca.org>
Sent: Wednesday, June 01, 2005 11:28 PM
Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane


> Uh, I just checked the website and those cells are way too low of capacity 
> to use for pattern.
>
> ???
>
> Jerry
>
>>Call Austin at MaxAmps.com  he has Lipos that will work..
>>
>>Stay tuned for my 2M electric pattern plane project..
>>
>>Scott Anderson
>>NSRCA 529
>>D3-AVP
>
> -- 
> ___________
> Jerry Budd
> Budd Engineering
> (661) 722-5669 Voice/Fax
> (661) 435-0358 Cell Phone
> mailto:jerry at buddengineering.com
> http://www.buddengineering.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.