Glow Engine Vs. Electric Engine for 2 m' pattern plane

Jerry Budd jerry at buddengineering.com
Thu Jun 2 06:00:08 AKDT 2005


OK, now I understand.  Please keep us informed on how it works out.

Thx, Jerry

>Jerry,
>
>That's why I said to call.. He is getting new cells in  My pack is 
>going to be a 10s2p at 4900mah..
>I'm coping a system in use and in the p sequence it uses about 3900mah..
>
>scott
>
>
>----- Original Message ----- From: "Jerry Budd" <jerry at buddengineering.com>
>To: <discussion at nsrca.org>
>Sent: Wednesday, June 01, 2005 11:28 PM
>Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane
>
>>Uh, I just checked the website and those cells are way too low of 
>>capacity to use for pattern.
>>
>>???
>>
>>Jerry
>>
>>>Call Austin at MaxAmps.com  he has Lipos that will work..
>>>
>>>Stay tuned for my 2M electric pattern plane project..
>>>
>>>Scott Anderson
>>>NSRCA 529
>>>D3-AVP
>>
>>--
>>___________
>>Jerry Budd
>>Budd Engineering
>>(661) 722-5669 Voice/Fax
>>(661) 435-0358 Cell Phone
>>mailto:jerry at buddengineering.com
>>http://www.buddengineering.com
>>=================================================
>>To access the email archives for this list, go to
>>http://lists.f3a.us/pipermail/nsrca-discussion/
>>To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>and follow the instructions.
>>
>>List members email returned for mailbox full will be removed from the list.
>>
>
>=================================================
>To access the email archives for this list, go to
>http://lists.f3a.us/pipermail/nsrca-discussion/
>To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>
>List members email returned for mailbox full will be removed from the list.


-- 
___________
Jerry Budd
Budd Engineering
(661) 722-5669 Voice/Fax
(661) 435-0358 Cell Phone
mailto:jerry at buddengineering.com
http://www.buddengineering.com
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.



More information about the NSRCA-discussion mailing list