Glow Engine Vs. Electric Engine for 2 m' pattern plane

[Richard Strickland]

Hey Jerry,

I haven't looked at that site--but FMA/ Kokam has a flat, stacked, very
stiff design that gives more useable power out of a given pack rating, is
not as prone to swelling or puffing as the plates can expand and retract
thermally with out permanent damage--as opposed to the rolled and squashed
designs we're used to.

Richard

----- Original Message -----
From: "Jerry Budd" <jerry at buddengineering.com>
To: <discussion at nsrca.org>
Sent: Wednesday, June 01, 2005 10:28 PM
Subject: Re: Glow Engine Vs. Electric Engine for 2 m' pattern plane


> Uh, I just checked the website and those cells are way too low of
> capacity to use for pattern.
>
> ???
>
> Jerry
>
> >Call Austin at MaxAmps.com  he has Lipos that will work..
> >
> >Stay tuned for my 2M electric pattern plane project..
> >
> >Scott Anderson
> >NSRCA 529
> >D3-AVP
>
> --
> ___________
> Jerry Budd
> Budd Engineering
> (661) 722-5669 Voice/Fax
> (661) 435-0358 Cell Phone
> mailto:jerry at buddengineering.com
> http://www.buddengineering.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the
list.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.