Webra 1.45 Prop

[David Lockhart]

You might be surprised how well the APC 16x13 works - very good vertical and braking for the relatively high pitch - and yes, it will go fast with the hammer down.  The 15x11 4 blade is also possible - but probably a little light on load.

Dave
  ----- Original Message ----- 
  From: RC Steve Sterling 
  To: discussion at nsrca.org 
  Sent: Sunday, July 10, 2005 1:14 PM
  Subject: RE: Webra 1.45 Prop


  With the ground clearance problem, you are probably need a 3 or 4  blade. Bob Pastorello is an expert.

  Otherwise, the 1.45 wants to turn a 17x10 or 17x12.  Any less diameter, and you would need the pitch so high, it would make the airplane too fast.
    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Bob Miller
    Sent: Sunday, July 10, 2005 9:32 AM
    To: discussion at nsrca.org
    Subject: Webra 1.45 Prop


    Need advice on prop for the 1.45 Webra.  I have a definite ground clearance concern.  A 17" just barely clears in a level attitude.  TIA for any help.

    Bob Miller
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050711/67a31e38/attachment.html