New Dremel cordless

Fri Jan 21 09:25:48 AKST 2005

On Jan 21, 2005, at 12:09 PM, Jim Ivey wrote:

> Ron
>  I bet that tube was a RK61. I still have my whole Babcock BCR10 
> system.

I had a receiver, which had an RK61, but it never worked.  What I flew 
was an ECE receiver, which had a 3D6 tube, as I remember.  I still have 
it.  For you young guys:  This all happened just after dirt was 
invented.

Ron Van Putte

> From: Ron Van Putte <vanputte at cox.net>
>> Date: 2005/01/21 Fri AM 10:48:46 EST
>> To: discussion at nsrca.org
>> Subject: Re: New Dremel cordless
>>
>>
>> On Jan 21, 2005, at 9:38 AM, <brianyemail-nsrca at yahoo.com> wrote:
>>
>>>  What did you use before nicads, lead/acid?
>>
>> You're not going to believe it, but we used dry cell batteries!
>> Remember, these were/are not rechargeable, so we had to buy new ones
>> when they ran down.  When I started, I had a single tube receiver with
>> 3 volt filament supply and 45 volt plate supply.  The transmitter had 
>> a
>> six volt filament supply and 135 volt plate supply.  I'll bet you're
>> sorry you asked now.
>>
>> Ron Van Putte
>>
>>>
>>> Ron Van Putte <vanputte at cox.net> wrote:
>>>
>>>  On Jan 20, 2005, at 8:22 PM, Bob Pastorello wrote:
>>>
>>>> ONLY until the first one goes "poof" in the workshop and burns down 
>>>> a
>>>> house.
>>>> But maybe they have all the safeguards in the world to prevent home
>>>> improvement guys from harming the batteries.
>>>>  
>>>> I can tell you I won't go near one.
>>>
>>> One of the "advantages" of being in this hobby for a long time is 
>>> that
>>>  you get to see a lot of things come and go. I can remember when I
>>> heard virtually the same comment about nickel cadmium batteries. I
>>> also remember a club member's airplane was blown in half when his six
>>>  year old son cranked up the charge rate on his home made variable
>>>  charger and the battery pack exploded. When the average modeler gets
>>>  smart about proper charging of lithium battery packs, we'll start
>>>  worrying about a new battery chemistry.
>>>
>>> Ron Van Putte
>>>
>>>> ----- Original Message -----
>>>> From: vicenterc at comcast.net
>>>> To: discussion at nsrca.org ; discussion at nsrca.org
>>>> Cc: Linda Carnes
>>>> Sent: Thursday, January 20, 2005 8:19 PM
>>>> Subject: Re: New Dremel cordless
>>>>
>>>> This is good news.  As soon as the power tools start to use Li-On 
>>>> the
>>>> price of the batteries is going to drop a lot.
>>>>  
>>>> Vince
>>>>  
>>>> -------------- Original message --------------
>>>>
>>>>> Cleaning is a good one you can get to places most tools can not.
>>>>> There is a tool for cleaning grout in tile and floors to get it
>>>> readdy to
>>>>> coat
>>>>> Sincerely
>>>>>
>>>>> Linda A. Carnes
>>>>>
>>>>> In loving memory of my Husband
>>>>> William Ross Carnes, 1954 - 2004
>>>>> ----- Original Message -----
>>>>> From: "Bill Glaze"
>>>>> To:
>>>>> Sent: Thursday, January 20, 2005 1:04 PM
>>>>> Subject: Re: New Dremel cordless
>>>>>
>>>>>
>>>>>> Linda:
>>>>>> Actually, she doesn't do nails, but keep coming up with ideas.
>>>> I'm all
>>>>>> ears. How about using the high-speed brush for getting some rust
>>>> off the
>>>>>> porch railing, and then painting with Rustoleum? If she could be
>>>>>> convinced, it'd prove to be right down her alley. Bill Glaze
>>>>>>
>>>>>> Linda Carnes wrote:
>>>>>>
>>>>>>> If she does her own acrylic nails they are great. I refuse to go
>>>> to a
>>>>>>> salon for safety and it saves a lot of cash.
>>>>>>> Sincerely
>>>>>>>
>>>>>>> Linda A. Carnes
>>>>>>>
>>>>>>> In loving memory of my Husband
>>>>>>> William Ross Carnes, 1954 - 2004
>>>>>>> ----- Original Message ----- From: "Bill Glaze"
>>>>>>> To:
>>>>>>> Sent: Thursday, January 20, 2005 9:35 AM
>>>>>>> Subject: Re: New Dremel cordless
>>>>>>>
>>>>>>>
>>>>>>>> Bob:
>>>>>>>> I've got one of these new Dremels too--wife got it for me as a
>>>> Christmas
>>>>>>>> present--I agree with your assesment. Great addition to the
>>>> workbench.
>>>>>>>> Now if I can just convince my wife that she can use it too for
>>>> household
>>>>>>>> chores..................Bill Glaze
>>>>>>>>
>>>>>>>> Bob Kane wrote:
>>>>>>>>
>>>>>>>>> I picked up a new Dremel Li-Ion cordless rotory tool
>>>>>>>>> last night while browsing at the local Meijers store.
>>>>>>>>> This thing is great, the power and speed of a corded
>>>>>>>>> tool in a cordless. Variable speed up to 35,000 RPM,
>>>>>>>>> battery charge indicator, just way too cool. Ok,
>>>>>>>>> enough time readind email, must be something I can
>>>>>>>>> grind/sand/drill/mill/cut . . . . . . . . ;)
>>>>>>>>>
>>>>>>>>> =====
>>>>>>>>> Bob Kane
>>>>>>>>> getterflash at yahoo.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> __________________________________ Do you Yahoo!? All your
>>>> favorites on
>>>>>>>>> one personal page ? Try My Yahoo!
>>>>>>>>> http://my.yahoo.com
>>>> =================================================
>>>>>>>>> To access the email archives for this list, go to
>>>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>>>>> To be removed from this list, go to
>>>>>>>>> http://www.nsrca.org/discussionA.htm
>>>>>>>>> and follow the instructions.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> =================================================
>>>>>>>> To access the email archives for this list, go to
>>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>>>>> and follow the instructions.
>>>>>>>
>>>>>>>
>>>>>>> =================================================
>>>>>>> To access the email archives for this list, go to
>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>>>> and follow the instructions.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> =================================================
>>>>>> To access the email archives for this list, go to
>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>>> and follow the instructions.
>>>>>
>>>>> =================================================
>>>>> To access the email archives for this list, go to
>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>> and follow the instructions.
>>>>>
>>
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.