New Dremel cordless

Fri Jan 21 09:51:26 AKST 2005

I've got a twin tube Rx.  I believe it has 2 "hard" tubes instead of
using a "gas" tube like the RK61.  I bought it at Edd Alexander's Hobby
Shop in Ft. Worth, TX in the early '50's.  Mr. Alexander died last year.
He was kin to Bernie Haire of Bernie's Hobby Shop in Dallas who passed
away sometime ago.  I've been there, done that.  Dwayne

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ron Van Putte
Sent: Friday, January 21, 2005 1:26 PM
To: discussion at nsrca.org
Subject: Re: New Dremel cordless

On Jan 21, 2005, at 12:09 PM, Jim Ivey wrote:

> Ron
>  I bet that tube was a RK61. I still have my whole Babcock BCR10 
> system.

I had a receiver, which had an RK61, but it never worked.  What I flew 
was an ECE receiver, which had a 3D6 tube, as I remember.  I still have 
it.  For you young guys:  This all happened just after dirt was 
invented.

Ron Van Putte

> From: Ron Van Putte <vanputte at cox.net>
>> Date: 2005/01/21 Fri AM 10:48:46 EST
>> To: discussion at nsrca.org
>> Subject: Re: New Dremel cordless
>>
>>
>> On Jan 21, 2005, at 9:38 AM, <brianyemail-nsrca at yahoo.com> wrote:
>>
>>>  What did you use before nicads, lead/acid?
>>
>> You're not going to believe it, but we used dry cell batteries!
>> Remember, these were/are not rechargeable, so we had to buy new ones
>> when they ran down.  When I started, I had a single tube receiver
with
>> 3 volt filament supply and 45 volt plate supply.  The transmitter had

>> a
>> six volt filament supply and 135 volt plate supply.  I'll bet you're
>> sorry you asked now.
>>
>> Ron Van Putte
>>
>>>
>>> Ron Van Putte <vanputte at cox.net> wrote:
>>>
>>>  On Jan 20, 2005, at 8:22 PM, Bob Pastorello wrote:
>>>
>>>> ONLY until the first one goes "poof" in the workshop and burns down

>>>> a
>>>> house.
>>>> But maybe they have all the safeguards in the world to prevent home
>>>> improvement guys from harming the batteries.
>>>>  
>>>> I can tell you I won't go near one.
>>>
>>> One of the "advantages" of being in this hobby for a long time is 
>>> that
>>>  you get to see a lot of things come and go. I can remember when I
>>> heard virtually the same comment about nickel cadmium batteries. I
>>> also remember a club member's airplane was blown in half when his
six
>>>  year old son cranked up the charge rate on his home made variable
>>>  charger and the battery pack exploded. When the average modeler
gets
>>>  smart about proper charging of lithium battery packs, we'll start
>>>  worrying about a new battery chemistry.
>>>
>>> Ron Van Putte
>>>
>>>> ----- Original Message -----
>>>> From: vicenterc at comcast.net
>>>> To: discussion at nsrca.org ; discussion at nsrca.org
>>>> Cc: Linda Carnes
>>>> Sent: Thursday, January 20, 2005 8:19 PM
>>>> Subject: Re: New Dremel cordless
>>>>
>>>> This is good news.  As soon as the power tools start to use Li-On 
>>>> the
>>>> price of the batteries is going to drop a lot.
>>>>  
>>>> Vince
>>>>  
>>>> -------------- Original message --------------
>>>>
>>>>> Cleaning is a good one you can get to places most tools can not.
>>>>> There is a tool for cleaning grout in tile and floors to get it
>>>> readdy to
>>>>> coat
>>>>> Sincerely
>>>>>
>>>>> Linda A. Carnes
>>>>>
>>>>> In loving memory of my Husband
>>>>> William Ross Carnes, 1954 - 2004
>>>>> ----- Original Message -----
>>>>> From: "Bill Glaze"
>>>>> To:
>>>>> Sent: Thursday, January 20, 2005 1:04 PM
>>>>> Subject: Re: New Dremel cordless
>>>>>
>>>>>
>>>>>> Linda:
>>>>>> Actually, she doesn't do nails, but keep coming up with ideas.
>>>> I'm all
>>>>>> ears. How about using the high-speed brush for getting some rust
>>>> off the
>>>>>> porch railing, and then painting with Rustoleum? If she could be
>>>>>> convinced, it'd prove to be right down her alley. Bill Glaze
>>>>>>
>>>>>> Linda Carnes wrote:
>>>>>>
>>>>>>> If she does her own acrylic nails they are great. I refuse to go
>>>> to a
>>>>>>> salon for safety and it saves a lot of cash.
>>>>>>> Sincerely
>>>>>>>
>>>>>>> Linda A. Carnes
>>>>>>>
>>>>>>> In loving memory of my Husband
>>>>>>> William Ross Carnes, 1954 - 2004
>>>>>>> ----- Original Message ----- From: "Bill Glaze"
>>>>>>> To:
>>>>>>> Sent: Thursday, January 20, 2005 9:35 AM
>>>>>>> Subject: Re: New Dremel cordless
>>>>>>>
>>>>>>>
>>>>>>>> Bob:
>>>>>>>> I've got one of these new Dremels too--wife got it for me as a
>>>> Christmas
>>>>>>>> present--I agree with your assesment. Great addition to the
>>>> workbench.
>>>>>>>> Now if I can just convince my wife that she can use it too for
>>>> household
>>>>>>>> chores..................Bill Glaze
>>>>>>>>
>>>>>>>> Bob Kane wrote:
>>>>>>>>
>>>>>>>>> I picked up a new Dremel Li-Ion cordless rotory tool
>>>>>>>>> last night while browsing at the local Meijers store.
>>>>>>>>> This thing is great, the power and speed of a corded
>>>>>>>>> tool in a cordless. Variable speed up to 35,000 RPM,
>>>>>>>>> battery charge indicator, just way too cool. Ok,
>>>>>>>>> enough time readind email, must be something I can
>>>>>>>>> grind/sand/drill/mill/cut . . . . . . . . ;)
>>>>>>>>>
>>>>>>>>> =====
>>>>>>>>> Bob Kane
>>>>>>>>> getterflash at yahoo.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> __________________________________ Do you Yahoo!? All your
>>>> favorites on
>>>>>>>>> one personal page ? Try My Yahoo!
>>>>>>>>> http://my.yahoo.com
>>>> =================================================
>>>>>>>>> To access the email archives for this list, go to
>>>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>>>>> To be removed from this list, go to
>>>>>>>>> http://www.nsrca.org/discussionA.htm
>>>>>>>>> and follow the instructions.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> =================================================
>>>>>>>> To access the email archives for this list, go to
>>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>>>>> and follow the instructions.
>>>>>>>
>>>>>>>
>>>>>>> =================================================
>>>>>>> To access the email archives for this list, go to
>>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>>>> and follow the instructions.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> =================================================
>>>>>> To access the email archives for this list, go to
>>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>>> and follow the instructions.
>>>>>
>>>>> =================================================
>>>>> To access the email archives for this list, go to
>>>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>>>> To be removed from this list, go to
>>>> http://www.nsrca.org/discussionA.htm
>>>>> and follow the instructions.
>>>>>
>>
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.