New Dremel cordless

Fri Jan 21 09:09:49 AKST 2005

Ron
 I bet that tube was a RK61. I still have my whole Babcock BCR10 system.

Jim Ivey
> 
> From: Ron Van Putte <vanputte at cox.net>
> Date: 2005/01/21 Fri AM 10:48:46 EST
> To: discussion at nsrca.org
> Subject: Re: New Dremel cordless
> 
> 
> On Jan 21, 2005, at 9:38 AM, <brianyemail-nsrca at yahoo.com> wrote:
> 
> >  What did you use before nicads, lead/acid?
> 
> You're not going to believe it, but we used dry cell batteries!  
> Remember, these were/are not rechargeable, so we had to buy new ones 
> when they ran down.  When I started, I had a single tube receiver with 
> 3 volt filament supply and 45 volt plate supply.  The transmitter had a 
> six volt filament supply and 135 volt plate supply.  I'll bet you're 
> sorry you asked now.
> 
> Ron Van Putte
> 
> >
> > Ron Van Putte <vanputte at cox.net> wrote:
> >
> >  On Jan 20, 2005, at 8:22 PM, Bob Pastorello wrote:
> >
> > > ONLY until the first one goes "poof" in the workshop and burns down a
> > > house.
> > > But maybe they have all the safeguards in the world to prevent home
> >  > improvement guys from harming the batteries.
> > >  
> > > I can tell you I won't go near one.
> >
> > One of the "advantages" of being in this hobby for a long time is that
> >  you get to see a lot of things come and go. I can remember when I
> > heard virtually the same comment about nickel cadmium batteries. I
> > also remember a club member's airplane was blown in half when his six
> >  year old son cranked up the charge rate on his home made variable
> >  charger and the battery pack exploded. When the average modeler gets
> >  smart about proper charging of lithium battery packs, we'll start
> >  worrying about a new battery chemistry.
> >
> > Ron Van Putte
> >
> > > ----- Original Message -----
> > > From: vicenterc at comcast.net
> > > To: discussion at nsrca.org ; discussion at nsrca.org
> > > Cc: Linda Carnes
> > > Sent: Thursday, January 20, 2005 8:19 PM
> > > Subject: Re: New Dremel cordless
> > >
> > > This is good news.  As soon as the power tools start to use Li-On the
> >  > price of the batteries is going to drop a lot.
> > >  
> > > Vince
> > >  
> > > -------------- Original message --------------
> > >
> > > > Cleaning is a good one you can get to places most tools can not.
> > > > There is a tool for cleaning grout in tile and floors to get it
> > > readdy to
> > > > coat
> > > > Sincerely
> > > >
> > > > Linda A. Carnes
> > > >
> > > > In loving memory of my Husband
> > > > William Ross Carnes, 1954 - 2004
> > > > ----- Original Message -----
> > > > From: "Bill Glaze"
> > > > To:
> > > > Sent: Thursday, January 20, 2005 1:04 PM
> > > > Subject: Re: New Dremel cordless
> > > >
> > > >
> > > > > Linda:
> > > > > Actually, she doesn't do nails, but keep coming up with ideas.
> >  > I'm all
> > > > > ears. How about using the high-speed brush for getting some rust
> >  > off the
> > > > > porch railing, and then painting with Rustoleum? If she could be
> > > > > convinced, it'd prove to be right down her alley. Bill Glaze
> > > > >
> > > > > Linda Carnes wrote:
> > > > >
> > > > >> If she does her own acrylic nails they are great. I refuse to go
> > > to a
> > > > >> salon for safety and it saves a lot of cash.
> > > > >> Sincerely
> > > > >>
> > > > >> Linda A. Carnes
> > > > >>
> > > > >> In loving memory of my Husband
> > > > >> William Ross Carnes, 1954 - 2004
> > > > >> ----- Original Message ----- From: "Bill Glaze"
> > > > >> To:
> > > > >> Sent: Thursday, January 20, 2005 9:35 AM
> > > > >> Subject: Re: New Dremel cordless
> > > > >>
> > > > >>
> > > > >>> Bob:
> > > > >>> I've got one of these new Dremels too--wife got it for me as a
> > > Christmas
> > > > >>> present--I agree with your assesment. Great addition to the
> >  > workbench.
> > > > >>> Now if I can just convince my wife that she can use it too for
> > > household
> > > > >>> chores..................Bill Glaze
> > > > >>>
> > > > >>> Bob Kane wrote:
> > > > >>>
> > > > >>>> I picked up a new Dremel Li-Ion cordless rotory tool
> > > > >>>> last night while browsing at the local Meijers store.
> > > > >>>> This thing is great, the power and speed of a corded
> > >  > >>>> tool in a cordless. Variable speed up to 35,000 RPM,
> > > > >>>> battery charge indicator, just way too cool. Ok,
> > > > >>>> enough time readind email, must be something I can
> > > > >>>> grind/sand/drill/mill/cut . . . . . . . . ;)
> > > > >>>>
> > > > >>>> =====
> > > > >>>> Bob Kane
> > > > >>>> getterflash at yahoo.com
> > > > >>>>
> > > > >>>>
> > > > >>>> __________________________________ Do you Yahoo!? All your
> >  > favorites on
> > > > >>>> one personal page ? Try My Yahoo!
> > > > >>>> http://my.yahoo.com
> >  > =================================================
> > > > >>>> To access the email archives for this list, go to
> > > > >>>> http://lists.f3a.us/pipermail/nsrca-discussion/
> > > > >>>> To be removed from this list, go to
> > > > >>>> http://www.nsrca.org/discussionA.htm
> > > > >>>> and follow the instructions.
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>
> > > > >>> =================================================
> > > > >>> To access the email archives for this list, go to
> > > > >>> http://lists.f3a.us/pipermail/nsrca-discussion/
> > > > >>> To be removed from this list, go to
> > > http://www.nsrca.org/discussionA.htm
> > > > >>> and follow the instructions.
> > > > >>
> > > > >>
> > > > >> =================================================
> > > > >> To access the email archives for this list, go to
> > > > >> http://lists.f3a.us/pipermail/nsrca-discussion/
> > > > >> To be removed from this list, go to
> > > http://www.nsrca.org/discussionA.htm
> > > > >> and follow the instructions.
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > > =================================================
> > > > > To access the email archives for this list, go to
> > > > > http://lists.f3a.us/pipermail/nsrca-discussion/
> > > > > To be removed from this list, go to
> > > http://www.nsrca.org/discussionA.htm
> > > > > and follow the instructions.
> > > >
> > > > =================================================
> > > > To access the email archives for this list, go to
> > > > http://lists.f3a.us/pipermail/nsrca-discussion/
> > > > To be removed from this list, go to
> > > http://www.nsrca.org/discussionA.htm
> > > > and follow the instructions.
> > > >
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.