G3 Simulator

[Larry Diamond]

I'm thinking Bob Kane or some other folks have built a 2M plane for the
G2...It should work with the G3 as well.

Also some one has the Tracer mods that I have set up, but I don't have the
original e-mail any more...If some one don't come up with something, I'll
try to find a hard copy of the e-mail and send you a scanned copy...

Larry


-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Mark Hunt
Sent: Monday, January 10, 2005 8:29 PM
To: discussion at nsrca.org
Subject: Re: G3 Simulator

Bill,

My advice would be to start with the extra 330s (looks like a nice widebody 
to me) and just go through every measurement on the plane.  If you have a 2M

pattern plane, just insert all the dimensions into the 330s.  It may not be 
perfect when your done, but it will be close....of course you will likely 
need to change the powerplant as well....

If G3 allows import of modified G2 plane files, I can email  you a couple of

pattern files...

flyintexan at houston.rr.com

regards,
Mark


----- Original Message ----- 
From: "Eddie Batchelor" <perkinsrx at centurytel.net>
To: <discussion at nsrca.org>
Sent: Monday, January 10, 2005 3:41 PM
Subject: RE: G3 Simulator


> I've been happy with the pattern files shared on this list.
> There are plane files donated by Mark Hunt, Keith Black, Ray Rhodes and I
> can't remember who all else.
> You'll probably need a couple of those volumes because the basic plane 
> they
> modified is in them.
>
> The most valuable thing for me was the "poles" indicating the box. I 
> forget
> now who made that modification - but I owe him a big thank you. It took an
> otherwise useless program and made an acceptable practice tool.
>
> Of course I'm a lowly Sportsman flyer just moving up to Int -so YMMV  <G>
>
> Eddie
>
> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of Bill Glaze
> Sent: Monday, January 10, 2005 12:33 PM
> To: NSRCA Discussion
> Subject: G3 Simulator
>
>
> Please forgive the somewhat off-topic message, but I've got a dilemma.
> For Christmas, my wife got me a G3 program, which I have installed in my
> computer.  It runs very well.  But, so far,  on the basic G3 program, I
> haven't been able to find the type of airplane I want, (pattern) and so
> I haven't begun to try to program the airplane parameters.
> My wife, who doesn't do things by halves, also bought me all 5 add-ons.
> Now, I'm sure I won't need all 5 if I can just find the proper airplane
> and properly set the parameters to something resembling my Focus.  The
> pictures on the boxes leave something to my imagination.
> Any input will be a big help.  As I say, the program is running well, so
> that removes one stumbling block.
> Any help gratefully accepted.
>
> Bill Glaze
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.