G3 Simulator
Bob Kane
getterflash at yahoo.com
Mon Jan 10 18:09:06 AKST 2005
Yeh, yeh, ok I did build an El Nino look-alike based
on the UltraSport. No add ons needed. Email me
offline and I can send the files.
--- Larry Diamond <lld613 at psci.net> wrote:
> I'm thinking Bob Kane or some other folks have built
> a 2M plane for the
> G2...It should work with the G3 as well.
>
> Also some one has the Tracer mods that I have set
> up, but I don't have the
> original e-mail any more...If some one don't come up
> with something, I'll
> try to find a hard copy of the e-mail and send you a
> scanned copy...
>
> Larry
>
>
> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org] On
> Behalf Of Mark Hunt
> Sent: Monday, January 10, 2005 8:29 PM
> To: discussion at nsrca.org
> Subject: Re: G3 Simulator
>
> Bill,
>
> My advice would be to start with the extra 330s
> (looks like a nice widebody
> to me) and just go through every measurement on the
> plane. If you have a 2M
>
> pattern plane, just insert all the dimensions into
> the 330s. It may not be
> perfect when your done, but it will be close....of
> course you will likely
> need to change the powerplant as well....
>
> If G3 allows import of modified G2 plane files, I
> can email you a couple of
>
> pattern files...
>
> flyintexan at houston.rr.com
>
> regards,
> Mark
>
>
> ----- Original Message -----
> From: "Eddie Batchelor" <perkinsrx at centurytel.net>
> To: <discussion at nsrca.org>
> Sent: Monday, January 10, 2005 3:41 PM
> Subject: RE: G3 Simulator
>
>
> > I've been happy with the pattern files shared on
> this list.
> > There are plane files donated by Mark Hunt, Keith
> Black, Ray Rhodes and I
> > can't remember who all else.
> > You'll probably need a couple of those volumes
> because the basic plane
> > they
> > modified is in them.
> >
> > The most valuable thing for me was the "poles"
> indicating the box. I
> > forget
> > now who made that modification - but I owe him a
> big thank you. It took an
> > otherwise useless program and made an acceptable
> practice tool.
> >
> > Of course I'm a lowly Sportsman flyer just moving
> up to Int -so YMMV <G>
> >
> > Eddie
> >
> > -----Original Message-----
> > From: discussion-request at nsrca.org
> > [mailto:discussion-request at nsrca.org]On Behalf Of
> Bill Glaze
> > Sent: Monday, January 10, 2005 12:33 PM
> > To: NSRCA Discussion
> > Subject: G3 Simulator
> >
> >
> > Please forgive the somewhat off-topic message, but
> I've got a dilemma.
> > For Christmas, my wife got me a G3 program, which
> I have installed in my
> > computer. It runs very well. But, so far, on
> the basic G3 program, I
> > haven't been able to find the type of airplane I
> want, (pattern) and so
> > I haven't begun to try to program the airplane
> parameters.
> > My wife, who doesn't do things by halves, also
> bought me all 5 add-ons.
> > Now, I'm sure I won't need all 5 if I can just
> find the proper airplane
> > and properly set the parameters to something
> resembling my Focus. The
> > pictures on the boxes leave something to my
> imagination.
> > Any input will be a big help. As I say, the
> program is running well, so
> > that removes one stumbling block.
> > Any help gratefully accepted.
> >
> > Bill Glaze
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
=====
Bob Kane
getterflash at yahoo.com
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
More information about the NSRCA-discussion
mailing list