AFPD installation

[Jerry Stebbins]

Bob, guess you just made my choice easier. If we cannot share our tweaks easily among those that really want them, then I will stay with Great Planes, no matter how "Great" a different simulator is. I would suggest either they "fix it" or we just don"t buy it, and hurt their bottom line. Thats the best way to get their attention!!!!!"So there goes 5 sales from this area.
Jerry 
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: discussion at nsrca.org 
  Sent: Sunday, January 09, 2005 4:53 AM
  Subject: Re: AFPD installation


  Xavier - the Smaragd needs LOTS of tweaks to get it "near pattern".  Evidently, the default design was NOT programmed in AFP by a pattern pilot (at least not a competitive one!)
      I am nearly done tweaking mine, and it's getting very close, but I have been admonished by the US distributor/rep that making the modified airplane files available is a violation of the software EULA for the product, so I can't share the files.
      I *can* write down the parameters, and will do so shortly and post that on my website.

  Bob Pastorello
  NSRCA 199  AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net


    ----- Original Message ----- 
    From: Anne et Xavier 
    To: discussion at nsrca.org 
    Sent: Saturday, January 08, 2005 11:40 PM
    Subject: RE: AFPD installation


    Thanks to all who gave suggestions. I try all of them actually before my
    first messsage :-)

    It seems that my CD reader is at fault. I tried 2D different CD on my PC
    with the same result. I tried my CD on a friend's PC and it worked righ
    away. My PC is only about 2 months old and I will get in contact with my
    salesman ASAP. 

    I was able to play with AFPD with my friend and we are both impressed.
    We tried various planes and they all behave very realistically. He had
    the same trouble with the shockflyer that he has with his real one. I
    was having as much fun with the Shockflyer and other 3D planes that I
    have with my real ones. He was good with the heli and was struggling.
    Same in the real life. The Smarag fly very similar to my real pattern
    plane. One thing we notice was that all the CG's were too much forward
    to our taste.

    I can't wait to have it working here.

    Xavier


    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
    On Behalf Of Wladimir Kummer de Paula
    Sent: January 8, 2005 12:10 PM
    To: discussion at nsrca.org
    Subject: Re: AFPD installation


    Seems a kind of copy protection you may want to contact Aerofly. Did you

    have tried to install from de Hard Drive or Directly from the CDROM. 
    Maybe you could try to copy all installation files to a folder in the 
    Hard Drive and try again

    Wladimir

    Del Rykert escreveu:

    > *No experience with flight sims Xavier but have you tried their web
    > site for trouble shooting? *
    > * *
    > *    del*
    >  
    >
    >     ----- Original Message -----
    >     *From:* Anne et Xavier <mailto:xavier.mouraux at sympatico.ca>
    >     *To:* discussion at nsrca.org <mailto:discussion at nsrca.org>
    >     *Sent:* Saturday, January 08, 2005 10:52 AM
    >     *Subject:* AFPD installation
    >
    >     Hello guys,
    >     I finally got my AFPD last night but the installation doesn't
    >     work. I tried another CD with exactly the same results. I haven't
    >     tried another PC yet but hopefully during the weekend.
    >     I have posted the error message on this page
    >     http://xavier.mouraux.com/afpd-error-message.htm and also on RCU
    >     but maybe someone on this forum had the same error before. Any
    >     suggestion ?
    >     With all the snow outside, that is my only option to fly pattern
    >     for another few months.
    >     Thanks
    >     Xavier
    >      
    >

    =================================================
    To access the email archives for this list, go to
    http://lists.f3a.us/pipermail/nsrca-discussion/
    To be removed from this list, go to http://www.nsrca.org/discussionA.htm
    and follow the instructions.

    =================================================
    To access the email archives for this list, go to
    http://lists.f3a.us/pipermail/nsrca-discussion/
    To be removed from this list, go to http://www.nsrca.org/discussionA.htm
    and follow the instructions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050109/672eb1c6/attachment-0001.html