Futaba 8UA

[Troy A. Newman]

Wayne,

Look to getting the TX serviced. The TX pots are worn or have slipped. This
is a pretty common deal. If your TX has a couple years on it its time for
new TX gimbal pots. I used to fly the Futaba 9Z and same problem with the
pots were worn.


TN
----- Original Message ----- 
From: "Wayne Galligan" <wgalligan at goodsonacura.com>
To: <discussion at nsrca.org>
Sent: Friday, January 07, 2005 4:53 PM
Subject: Futaba 8UA


> I have a problem with dual elevator control.
>
> I am using the Ailevator mode for dual elevator servo's on my Funtana.
The
> problem is when I switch from D/R high to low a small amount of up trim
> kicks in on both servo's.  I cant seem to find any thing in both the
factory
> manual or the aftermarket manual on this issue.
> Hopefully all you radio guru's have an answer to my dilemma.
>
> Thanks
>
> Wayne Galligan
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.