Futaba 8UA

[Wayne Galligan]

I have a problem with dual elevator control.

I am using the Ailevator mode for dual elevator servo's on my Funtana.  The
problem is when I switch from D/R high to low a small amount of up trim
kicks in on both servo's.  I cant seem to find any thing in both the factory
manual or the aftermarket manual on this issue.
Hopefully all you radio guru's have an answer to my dilemma.

Thanks

Wayne Galligan


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.