YS 63

[Dwayne & Nancy]

Call Richard Varno, High Performance, at 775-782-4562 in Nevada.  I have
always had excellent service from YS.  Dwayne
 
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Gerald Gallagher
Sent: Sunday, January 02, 2005 5:18 PM
To: NSRCA Mailing List
Subject: YS 63
 
 I just got a new YS 63 & it will not run correctly. It seams to want to
go to very rich all of a sudden & then  back fire & stop. I have 3 other
YS motors But this one has me stumped. fuel to the needle valve in small
squirts which seams normal. When I shut off the fuel & spin out the fuel
without glow plug lit it will turn freely unlike when their is a
hydraulic lock. In truth it seams like the valves may be working
incorrectly but they look ok & are closed on compression stroke. I do
not remember where the punch mark should be on the cam when you remove
the cover & look in. I will call Tony & see what he has to say tomorrow.
Any thoughts would be considered. 
Thanks 
 
Jerry Gallagher
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050103/7987f4c6/attachment.html