building jigs

[steven maxwell]

 Would even be a great article for the K-Factor Buddy sense you plan on
giving it away anyhow.
 Steve Maxwell


> [Original Message]
> From: Evan H. Dygert <evand at dygertconsulting.com>
> To: <discussion at nsrca.org>
> Date: 1/2/2005 4:47:13 PM
> Subject: Re: building jigs
>
> Thanks Buddy! I really appreciate it. I sure wish that I 
> was advanced enough to make a contribution like this.
>
> On Sun, 2 Jan 2005 10:56:32 EST
>   BUDDYonRC at aol.com wrote:
> >For all of you who requested pictures and details of my 
> > alignment jig, I 
> >haven't forgotten your request.
> >I am in the process of preparing a complete Manuel with 
> > plans and details 
> >for the building and operation of my pattern plane 
> > alignment jig which should 
> >be complete next week. 
> >I will make it available in PDF format for all that would 
> > like to have a 
> >copy.
> >I will post on this list when it is available and how you 
> >can  download a 
> >copy.
> >Buddy Brammer 
>
> Evan H. Dygert
> Dygert Consulting, Inc.
> 364 Twelve Oaks Dr.
> Winter Springs, FL 32708
> Tel: 407-739-8194
> Email: evand at dygertconsulting.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.



=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.