fuel tank venting w/perry regulated pump

[Scott Anderson]

Ron,

I use the KISS system... no "t" or check valves.. just a fitting thru the floor.. ask Ed Hartley how well the plane works.. :)

Scott
  ----- Original Message ----- 
  From: Nat Penton 
  To: discussion at nsrca.org 
  Sent: Sunday, February 27, 2005 8:43 PM
  Subject: Re: fuel tank venting w/perry regulated pump


  Ron I put a one way valve in the line, with a T in it,. Plug the T when thru fueling.         Nat
    ----- Original Message ----- 
    From: ron donato 
    To: discussion at nsrca.org 
    Sent: Sunday, February 27, 2005 6:47 PM
    Subject: fuel tank venting w/perry regulated pump


    i just installed a perry pump and the instructions say not to use muffler pressure to the tank. my question is, how do i vent the tank properly so i don't create a siphon from the vent line?


----------------------------------------------------------------------------
    Do you Yahoo!?
    Read only the mail you want - Yahoo! Mail SpamGuard. 


----------------------------------------------------------------------------


    Internal Virus Database is out-of-date.
    Checked by AVG Anti-Virus.
    Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 2/10/2005



------------------------------------------------------------------------------


  Internal Virus Database is out-of-date.
  Checked by AVG Anti-Virus.
  Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 2/10/2005
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050228/e35f3985/attachment.html