PPG K-36 Primer?

[George Kennie]

Kenny,
Use 860 reducer as much as you need to get the spray viscocity required.
G.

Ken Velez wrote:

>  Hi guys, I just got some K-36 primer from Tony at RS but forgot to ask if
> it can be thinned with PPG reducer. It's supposed to be mixed 5.1 ratio but
> it seems too thick for spraying at low pressure. Anyone has tried thinning
> it out some how. I looked at the label but it only shows the mixing ratios.
> TIA.
>
> Ken Velez
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.




=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.