photo's

[brianyemail-nsrca at yahoo.com]

Pat, why dont you start a thread on the RCU pattern forum. It will draw lots of interest. 
 
http://www.rcuniverse.com/forum/RC_Pattern_Flying/forumid_101/tt.htm


Grow Pattern <pattern4u at comcast.net> wrote:
Try it - there's no ban on pic's just a size limit on the e-mails. - Eric.

If it does not work just post the link to RCU etc.


----- Original Message ----- 
From: "Pat Hewitt" 

To: 
Sent: Friday, February 18, 2005 10:12 AM
Subject: photo's


I am new to the list so my question is can you send photo's????? I have the
beginning of our ABBRA project and I can post a few if it is OK. Please
advise.


Thanks

Pat Hewitt




------ Original Message ------
Received: 09:03 AM CST, 02/18/2005
From: "Karl G. Mueller" 
To: 
Subject: Re: Belly Pan - Icepoint Style

Eric knows how. He's done it himself and he 's trying to tell me it doesn't
come through.

Karl G. Mueller
kgamueller at rogers.com

----- Original Message ----- 
From: Ken Thompson III
To: discussion at nsrca.org
Sent: Friday, February 18, 2005 10:17 AM
Subject: Re: Belly Pan - Icepoint Style


I think he knows somebody, Ron.

Ken
----- Original Message ----- 
From: Ron Van Putte
To: discussion at nsrca.org
Sent: Friday, February 18, 2005 9:29 AM
Subject: Re: Belly Pan - Icepoint Style



On Feb 17, 2005, at 11:02 PM, Ed Hartley wrote:


Along with Bob's suggestion you may want to consider this. I use tabs
similar to Bob but use 4-40 blind mounting nuts. On the 4-40 screw I use a
roofing nail washer which are available at Home Depot, key word "cheap". I
would suggest you take a 4-40 screw with you and get the smallest size 
washer.
These washers are convex and have a piece of rubber glued to them. I find 
this
system works great on any fiber glass, wood or the junk plastic which comes
with some kits. So far, over a period of several years I have yet to have a
crack in any of the mentioned materials where the bolt hole is located.


Aside from admiring Ed's idea, another thought kept crashing around in 
my
brain, "How did Ed get a photo on the NSRCA Discussion List?" Come on Ed, 
fess
up.

Ron Van Putte


----- Original Message -----
From: Bob Pastorello
To: NSRCA
Sent: Thursday, February 17, 2005 8:54 PM
Subject: Belly Pan - Icepoint Style

Many of you offerred much-needed ideas on the solution to a 10-screw
nightmare. Here's the best I could do...thanks to those who made this a
reality....now we'll see if it will WORK.
This was the last step before balancing, and it's RTF. Finally.

http://www.rcuniverse.com/forum/fb.asp?m=2670617


Bob Pastorello
NSRCA 199 AMA 46373
rcaerobob at cox.net
www.rcaerobats.net






================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050218/cc5358aa/attachment.html