photo's

Ken Thompson III mrandmrst at comcast.net
Fri Feb 18 06:26:52 AKST 2005


Pat and Ron,

I just selected "file attachment" from my Insert tab.  It should give you 
the option of where you want to select your picture from.  I have a lot of 
my digital photos in a "My Pictures" folder.  Pick one and click "attach".

Ken
----- Original Message ----- 
From: "Grow Pattern" <pattern4u at comcast.net>
To: <discussion at nsrca.org>
Sent: Friday, February 18, 2005 10:14 AM
Subject: Re: photo's


> Try it - there's no ban on pic's just a size limit on the e-mails.  - 
> Eric.
>
> If it does not work just post the link to RCU etc.
>
>
> ----- Original Message ----- 
> From: "Pat Hewitt" <phewitt at farmersagent.com>
> To: <discussion at nsrca.org>
> Sent: Friday, February 18, 2005 10:12 AM
> Subject: photo's
>
>
> I am new to the list so my question is can you send photo's????? I have 
> the
> beginning of our ABBRA project and I can post a few if it is OK. Please
> advise.
>
>
> Thanks
>
> Pat Hewitt
>
>
>
>
> ------ Original Message ------
> Received: 09:03 AM CST, 02/18/2005
> From: "Karl G. Mueller" <kgamueller at rogers.com>
> To: <discussion at nsrca.org>
> Subject: Re: Belly Pan - Icepoint Style
>
> Eric knows how. He's done it himself and he 's trying to tell me it 
> doesn't
> come through.
>
> Karl G. Mueller
> kgamueller at rogers.com
>
>  ----- Original Message ----- 
>  From: Ken Thompson III
>  To: discussion at nsrca.org
>  Sent: Friday, February 18, 2005 10:17 AM
>  Subject: Re: Belly Pan - Icepoint Style
>
>
>  I think he knows somebody, Ron.
>
>  Ken
>    ----- Original Message ----- 
>    From: Ron Van Putte
>    To: discussion at nsrca.org
>    Sent: Friday, February 18, 2005 9:29 AM
>    Subject: Re: Belly Pan - Icepoint Style
>
>
>
>    On Feb 17, 2005, at 11:02 PM, Ed Hartley wrote:
>
>
>      Along with Bob's suggestion you may want to consider this. I use tabs
> similar to Bob but use 4-40 blind mounting nuts. On the 4-40 screw I use a
> roofing nail washer which are available at Home Depot, key word "cheap". I
> would suggest you take a 4-40 screw with you and get the smallest size 
> washer.
> These washers are convex and have a piece of rubber glued to them. I find 
> this
> system works great on any fiber glass, wood or the junk plastic which 
> comes
> with some kits. So far, over a period of several years I have yet to have 
> a
> crack in any of the mentioned materials where the bolt hole is located.
>
>
>    Aside from admiring Ed's idea, another thought kept crashing around in 
> my
> brain, "How did Ed get a photo on the NSRCA Discussion List?" Come on Ed, 
> fess
> up.
>
>    Ron Van Putte
>
>
>      ----- Original Message -----
>      From: Bob Pastorello
>      To: NSRCA
>      Sent: Thursday, February 17, 2005 8:54 PM
>      Subject: Belly Pan - Icepoint Style
>
>      Many of you offerred much-needed ideas on the solution to a 10-screw
> nightmare.  Here's the best I could do...thanks to those who made this a
> reality....now we'll see if it will WORK.
>          This was the last step before balancing, and it's RTF.  Finally.
>
>      http://www.rcuniverse.com/forum/fb.asp?m=2670617
>
>
>      Bob Pastorello
>      NSRCA 199  AMA 46373
>      rcaerobob at cox.net
>      www.rcaerobats.net
>
>
>
>
>
>
> ================To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 11069_1710.jpg
Type: image/jpeg
Size: 3400 bytes
Desc: not available
Url : http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050218/56f96ab8/11069_1710.jpg


More information about the NSRCA-discussion mailing list