photo's

[Grow Pattern]

Try it - there's no ban on pic's just a size limit on the e-mails.  - Eric.

If it does not work just post the link to RCU etc.


----- Original Message ----- 
From: "Pat Hewitt" <phewitt at farmersagent.com>
To: <discussion at nsrca.org>
Sent: Friday, February 18, 2005 10:12 AM
Subject: photo's


I am new to the list so my question is can you send photo's????? I have the
beginning of our ABBRA project and I can post a few if it is OK. Please
advise.


Thanks

Pat Hewitt




------ Original Message ------
Received: 09:03 AM CST, 02/18/2005
From: "Karl G. Mueller" <kgamueller at rogers.com>
To: <discussion at nsrca.org>
Subject: Re: Belly Pan - Icepoint Style

Eric knows how. He's done it himself and he 's trying to tell me it doesn't
come through.

Karl G. Mueller
kgamueller at rogers.com

  ----- Original Message ----- 
  From: Ken Thompson III
  To: discussion at nsrca.org
  Sent: Friday, February 18, 2005 10:17 AM
  Subject: Re: Belly Pan - Icepoint Style


  I think he knows somebody, Ron.

  Ken
    ----- Original Message ----- 
    From: Ron Van Putte
    To: discussion at nsrca.org
    Sent: Friday, February 18, 2005 9:29 AM
    Subject: Re: Belly Pan - Icepoint Style



    On Feb 17, 2005, at 11:02 PM, Ed Hartley wrote:


      Along with Bob's suggestion you may want to consider this. I use tabs
similar to Bob but use 4-40 blind mounting nuts. On the 4-40 screw I use a
roofing nail washer which are available at Home Depot, key word "cheap". I
would suggest you take a 4-40 screw with you and get the smallest size 
washer.
These washers are convex and have a piece of rubber glued to them. I find 
this
system works great on any fiber glass, wood or the junk plastic which comes
with some kits. So far, over a period of several years I have yet to have a
crack in any of the mentioned materials where the bolt hole is located.


    Aside from admiring Ed's idea, another thought kept crashing around in 
my
brain, "How did Ed get a photo on the NSRCA Discussion List?" Come on Ed, 
fess
up.

    Ron Van Putte


      ----- Original Message -----
      From: Bob Pastorello
      To: NSRCA
      Sent: Thursday, February 17, 2005 8:54 PM
      Subject: Belly Pan - Icepoint Style

      Many of you offerred much-needed ideas on the solution to a 10-screw
nightmare.  Here's the best I could do...thanks to those who made this a
reality....now we'll see if it will WORK.
          This was the last step before balancing, and it's RTF.  Finally.

      http://www.rcuniverse.com/forum/fb.asp?m=2670617


      Bob Pastorello
      NSRCA 199  AMA 46373
      rcaerobob at cox.net
      www.rcaerobats.net






================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.