Good Guys list...

[Tom Simes]

On Wed, 2 Feb 2005 11:29:19 -0600
"White, Chris" <chris at ssd.fsi.com> wrote:

> Add PatternProz...to that list.  Russell Honea of Ultimate RC Hobbies
> in Broken Arrow, OK. is not only a good Masters flyer, and good
> builder, but also a real promoter and assistant to pattern flyers over
> the US.
> 
> www.patternproz.com

I'll definitely second PatternProz!  Russell was very helpful in pushing
me up the learning curve that exists between .40 size sport planes and
intermediate (.90 2C size) pattern planes.

I would like to add the VectorFlight folks as well.  They were very
helpful and timely in answering several general questions about their
kits.  I wanted to buy one of their 58" Extra ARFs, but really wanted to
put my own covering scheme on it.  Figuring I had nothing to loose, I
asked if they could sell one as an ARC and much to my surprise they said
"We can certainly ship the airplane without the covering if you wish!". 
Another bonus for me is that they will ship priority mail to Alaska
which is MUCH cheaper than many retailers who insist that anything going
to Alaska needs to be sent via 2nd day air.

http://www.vectorflight.com/


I have also enjoyed super service from Radio South (like everyone!)

Boca bearings (their database makes a potential nightmare of matching
bearings into no big deal).


-- 
Tom

_____________________________________________________________________

       |  ,  |               Tom Simes
---------(@)---------        AMA 230068
        --|--                NSRCA 3830
          '                  nsrca at shinymetalass.com
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.